EASY CLEANING OF TILES AND GROUTS
Cleaning and disinfecting the floor is not enough to completely remove the dirt that lives in the house you must also pay close attention to the Advance Tile and grout cleaning Sydney that although they are not very visual you can still perceive the blackening of them.
Of course, it also depends on the colour of the tile, because if it is black it is not going to be so noticeable, but whatever the colour, it must not only be clean on the surface, but you must also take care of these places, which are often neglected.
USE BAKING SODA AND VINEGAR TO CLEAN TILES AND GROUT
To clean tiles and grout, the sodium bicarbonate must be dissolved in water to obtain a consistent paste, ensuring the use of rubber gloves to avoid any mistreatment of the hands since the paste must be applied with them.
Then scrub all over the grout, sodium bicarbonate works for any color and type of stone but vinegar does not, it is harmful to stones such as marble.
Then take the vinegar and place it in a spray bottle with a little water, spray the places where you applied the baking soda paste and wait for bubbles to form when this happens, this means that the tile and grout disinfection and purification process has started successfully.
Now you only have to wait until it stops bubbling, normally it will take about 2 minutes then take a brush and rub it by the areas where the substances were placed, then with only water scrub the floor and open the finish and your perfect Lucian tiles.
USE HYDROGEN PEROXIDE, SODIUM BICARBONATE AND DISHWASHER TO CLEAN TILES AND GROUT
To achieve effective cleaning of tiles and grout, the hydrogen peroxide, sodium bicarbonate and dishwasher should be mixed in a bowl. This mixture is very effective but you should keep in mind that it can damage the colored grout so it is recommended that it be applied a little as a test and then if you like the reaction, use it as mentioned below.
Apply the paste and use a brush to water the substance in all the places where you want to clean tiles and grout, you have to let it stand for about 15 minutes so that it acts in a great way, then proceed to rinse with hot water to remove all the residues that may be on the surface, it is recommended to use a scrubber to clean with great effectiveness and finally apply some clean water.
These alternatives are great for shining your tiles and grouts
However, you should be very careful as sometimes you can see the damage to the tiles so it is always best to hire the consultancy of a professional who takes care of the job and leaves the floor of your home as clean as possible, without risk of damage to your tiles.
With a good use of these tips, your home can look spectacular in the eyes of anyone who visits them and above all and most importantly in the eyes of your own eyes, keeping a clean and well-organized house is a pleasure and should be exercised to generate more harmony in the family.
Know more about:- Tile Grout Cleaning
Comments
Post a Comment